QGZ-DG1 automatic guide rail cutting machine

QGZ-DG1 automatic guide rail cutting machine

1.ABB-11kw high-power motor realizes efficient cutting of various materials;

2. the spindle is automatically and intelligently fed, and automatically returns to its position after cutting through photoelectric induction;
3. the main shaft can be accurately controlled by electronic handwheel or automatically, and the cutting perpendicularity is within 0.3;
4. hydraulic automatic fixture, one key automatic clamping (optional with 15 °, 30 °, 45 ° fixture);
5. the openings at both ends can meet the cutting of ultra long bars, and cooperate with the roller conveyor to realize uninterrupted cutting operation;
6. alarm prompt for wear of grinding wheel blade to ensure that there is no abnormality in cutting;
7. perforated brass clamping base plate;
8. the cutting room is bright and clear with double LED lighting and automatic mist discharge system;
9. six cooling water pipes to prevent sample burn;
10. the mobile magnetic filter circulating water tank avoids blocking and has high utilization rate.

This machine is specially designed for cutting guide rail type workpieces. It adopts ABB high-power motor, Schneider Electric and Mitsubishi software to realize efficient and fast cutting of workpieces. It has very high reliability and control ability. After the workpiece is cut off, the spindle automatically returns to its position, and the uninterrupted cutting operation can be realized by cooperating with the roller conveyor. The surface of the cut sample is bright, flat and free of burn. It is an ideal equipment for cutting guide rail type workpiece, and is suitable for production, processing and sample preparation inspection.

Control mode: Automatic cutting, controlled by 10 inch industrial touch screen, or switched to operating handle control

Feed rate:1~200mm/min (5~12mm/min recommended)

Cutting blade size :Φ400×3×Φ32mm

Cutting platform size (x*y):632×565mm

Travel Y-axis:200mm

Z-axis stroke:260mm

Maximum cut section:140×80mm

Clamp opening:160mm, hydraulic automatic clamping

Spindle motor:ABB motor, 11kw

Speed:500-3000 r/min

feed motor:servo motor

Input power supply:380V, 50Hz, 20A three-phase five wire

Overall dimension:1860×1755×2190mm

Weight:About 2500kg

Water tank capacity:120L

Pump flow:100L/min

Tank size:700×630×800mm

Water tank weight:90kg