Fast delivery
Sea&Air
YZXQ-1 Automatic Metallographic Sample Mounting Press
YZXQ-1 Automatic Metallographic Sample Mounting Press
Automatic Metallographic Sample Mounting Press is used to mosaic small specimens, specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallographic or rock specimens. The mosaic operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallographic microscope. The machine is heated, and intensified with pressure automatically. After the formation of the specimen under pressure, it stops the operation and discharges the pressure also in an automatical way. With another press of the knob, the machine automatically turns up the specimen, which may be taken away. Note: It is only for the hot solid materials (such as urea-formaldehyde molding powder and bakelite powder) with the temperature automatically regulated and controlled.
YZXQ-1A Automatic Single Head Mounting Press
YZXQ-1A Automatic Single Head Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-1A is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process.
YZXQ-2 Automatic Metallographic Sample Mounting Press
YZXQ-2 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-2 is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts hydraulic pump with higher pressure, which makes the sample more compact. Unique cold and heat separation design makes it more safe and stable. High-definition touch screen displays pressure and temperature in real time. The water cooling system makes sample preparation fast and the special rotary locking design makes operation more convenient. With stable and reliable performance, it is the ideal equipment for sample mounting.
YZXQ-2A automatic single head mounting press
YZXQ-2A automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
YZXQ-3 automatic single head mounting press
YZXQ-3 automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
ZXQ-1 Automatic Metallographic Sample Mounting Press
ZXQ-1 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. ZXQ-1 automatic metallographic sample mounting press adopts automatic mechanical pressure. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts gear motor with stable pressure, and the water cooling system makes sample preparation fast. With stable and reliable performance, it is the ideal equipment for sample mounting.
BZQG-65 Automatic Metallographic Sample Cutting Machine
BZQG-65 Automatic Metallographic Sample Cutting Machine
The machine is a combination of manual / PLC control and automatical control as one of the metallographic sample cutting machines, with very high reliability and control ability. Features: (i) manual and automatic free conversion, (ii) the touch screen displays a variety of cutting data, (iii) precise positioning, (iv) cut cutting, absolute cutting, incremental cutting-three functions cutting way, in order to make the cutting room easy to clean and ensure the spindle motor’s safety, we use mechanical and electrical separation. The cutting room security guard cover selected transparent plexiglass material. The cutting indoor room installed ventilation fan to increase the working room light and clarity. The design is more humane, using man-machine engineering principles. The device is equipped with a cooling water tank designed for the storage of coolant. Cutting sample of rock, ceramic, diamond grinding wheel must be used before cutting. BZQG-65 features: low noise, easy to operate, beautiful appearance, safe to use, and is one of the necessary equipment for laboratory sample preparation.
JMQ-12 low speed precision cutting machine
JMQ-12 low speed precision cutting machine is mainly used to cut small cylinder, square metal and electronic circuit board materials. The machine adopts deadweight cutting which has a constant load and will stop automatically when the cutting is finished. It has a micrometer to adjust the thickness of the sample for precise cutting which can be used as corollary equipment for TEM. The machine has controllable rotating speed and is equipped with safe and transparent protective cover. To avoid burning the sample due to overheating, the diamond cut-off wheel will bring out the cooling water when cutting to cool the wheel and the sample. The surface of the sample after cutting is bright and flat without burns, thus it is an excellent machine for cutting small material and electronic circuit boards.
JMQ-30 Precise Cutting Machine
JMQ-30 precise cutting machine is a single chip control cutting machine. It is suitable for the precision cutting of metal, electronics, ceramics, crystal, hard alloy, organic material, biological material (tooth, bone) and other materials without deformation. This machine has continuously cutting; high accuracy of positioning; wide range of speed regulating; strong cutting ability; internal circulation cooling system; can be preset feed speed; touching screen control and display; two position for clamping; with safety switch closed cutting room; and it is the ideal equipment to prepare high-quality specimens for the industrial and mining enterprises and institutes.
JMQ-60Z automatic precision cutting machine
JMQ-60Z automatic precision cutting machine is controlled by single chip, which is suitable for precise deformable cutting of metals, electronic components, ceramic materials, crystals, cemented carbides, rocks, minerals, concrete, organic materials, biological materials (teeth, bones) and other materials. This machine cuts along Y axis which has high accuracy of positioning, wide range of speed regulating and strong cutting ability with the touch screen control and display. The cutting chamber adopts totally enclosed structure with safety limit switch and transparent window for observation. With the circulation cooling system, the surface of the cut sample is bright and smooth without burns. It is the classic selection of benchtop automatic cutting machine.
SQG-1 cutting machine
Cutting is the first important procedure in the process of the sample preparation. This machine adopts high speed rotating resin cut-off wheel to cut the samples. In order not to burn the sample, it is equipped with cooling system. It is widely used in the metallographic laboratory for cutting various samples, which is very easy to operate and maintain.
QG-2 Lithofacies Sample Cutting Machine
Cutting is the first important procedure in the process of the sample preparation. This machine is suitable for the general lithofacies materials. The shell, axle sleeve, jaw, work table and other main parts are all made of stainless steel, which can endure long time. It adopts quick clamp for manual feeding which is very convenient to operate. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for cutting lithofacies samples.
