Fast delivery
Sea&Air
Q-100BS cutting machine
Q-100BS cutting machine is composed of machine body, electric control box, cutting chamber, motor, cooling system, cutting grinding wheel, etc. The cutting machine can not only cut circular workpieces with a diameter of less than 100mm, but also cut rectangular specimens with a height of 100mm and a depth of less than 200mm. The machine cools the sample through the cooling system to prevent the sample from overheating and burning the tissue during the cutting process. The machine can also set the cutting speed for cutting different samples, so as to improve the quality of cutting samples. The machine separates dynamic cutting and automatic cutting. The large volume cutting room is more convenient for the cutter to use. It is one of the important sample preparation equipment for metallographic tests in colleges, universities, factories and enterprises.
Q-80Z manual / automatic metallographic specimen cutting machine
Q-80Z manual / automatic metallographic specimen cutting machine is equipped with big cutting room and movable T-shape work table. Therefore this machine has the ability of cutting rectangle and large specimens. Also the equipped separate type vice is very convenient for operator to clamp various heterotypic work pieces.
QG-120 metallographic sample cutting machine
The QG-120 metallographic sample cutting machine has absorbed the advanced PLC technology on the structure and the selection of materials and manufacturing processes. Well-developed a new generation of automatic digitization novel metallurgical equipment, this machine gets good feedback from both the experts and the users.
This machine is mainly made up of the upper cover, the intermediate base, the lower frame and strong cooling system and the X-axis, Y-axis, Z-axis driving mechanism these seven components.
QG-2 Lithofacies Sample Cutting Machine
Cutting is the first important procedure in the process of the sample preparation. This machine is suitable for the general lithofacies materials. The shell, axle sleeve, jaw, work table and other main parts are all made of stainless steel, which can endure long time. It adopts quick clamp for manual feeding which is very convenient to operate. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for cutting lithofacies samples.
QG-3 cutting machine
This machine is suitable for general metallographic and lithofacies materials. By pulling the spindle and using the spindle gravity to cut the sample, the speed is high and the cutting ability is strong. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, while there is an opening in the left of the cover which can cut long strip samples, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting. This model is divided into benchtop and floor type for customers to choose.
QG-3A Metallographic Sample Cutting Machine
QG-3A Metallographic Sample Cutting Machine
The spindle shaft of the abrasive wheel is fitted on the rocker arm bearing block, it is driven by the V-belt. Loose or tight of the V-belt can be adjusted by deflecting the tensioner. Swinging motion of the swinging arm will convert to the feed motion of the abrasive wheel whether the cutting feed quick or slow will depend on the swinging arm. Above the working table is the specimen quick clamping device. Pressure bar can move up and down. Clamp and use easily and intelligently. There are cooling liquid passing in the pressure bar. Under the pressure bar there is the working clamp port.
QG-4 Metallographic Sample Cutting Machine
QG-4 Multifunctional Cutting Machine
QG-4 multifunctional cutting machine is mainly used for cutting cylinder and samples of anomalistic shape, such as multi-angular shape, protruding board, etc. It adopts the all-sealing structure, which can guarantee the cutting sample under the conditions of absolute safety. In order to avoid the sample burning the material texture because of over-heating in cutting, besides the cutter matching strong cooling system, the sample can revolve in the cutting, which can avoid the sample's surface being burned in the cutting, and can increase the cutting cross section, raising the availability of cutting emery wheel. The cutter has the advantages of easy to operate, use, maintain, etc, which is an excellent equipment of cutting anomalistic shapes.
QG-4A Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The cutting thickness of the material can be adjusted by the lateral movement of the cutting table, and then the sample can be cut by the longitudinal movement of the spindle, which has strong cutting ability and convenient operation. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-5 Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The sample can be cut by the longitudinal movement of the table, which has large cutting range and strong cutting ability. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel and with built-in flushing water gun, it has long service life and convenient maintenance. The cutting chamber adopts two sides’ transparent plexiglass window, built-in LED lamp and powerful exhaaust fan, which makes observation more clear. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
