Fast delivery
Sea&Air
YM-1 Metallographic Sample Pre-grinder
YM-1 Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1 is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
YM-1 Metallographic Sample Pre-grinder
YM-1 Metallographic Sample Pre-grinder
YM-1A Metallographic Sample Pre-grinder
YM-1A Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
YM-1B metallographic sample pre grinding machine
YM-1B metallographic sample pre grinding machine
- single disk desktop design, easy to operate
- provide water supply system for wet grinding to prevent damage to metallographic structure due to sample overheating
- ABS materials are integrated and visualized
- stable transmission, low noise, convenient operation and maintenance
YM-2A Metallographic Sample Pre-grinder
YM-2A Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-2A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
YMP-1 Metallographic Sample Grinding and Polishing Machine
YMP-1 Metallographic Sample Grinding and Polishing Machine
Introduction:
YMP-1 is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has stepless speed or four speed control and can change the rotational direction. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
YMP-1A Metallographic Sample Grinding and Polishing Machine
YMP-1A Metallographic Sample Grinding and Polishing Machine
Introduction:
YMP-1A is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It can choose two speeds, which is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
YMP-1T-250 Metallographic Sample Grinding and Polishing Machine
YMP-1T-250 Metallographic Sample Grinding and Polishing Machine
Introduction:
This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience.
YMP-2 Metallographic Sample Grinding and Polishing Machine Stepless
YMP-2 Metallographic Sample Grinding and Polishing Machine Stepless
Introduction:
YMP-2 is a single-chip microcomputer controlled grinding and polishing machine, two discs are independently controlled. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance.
YMP-2A Metallographic Sample Grinding and Polishing Machine
YMP-2A Metallographic Sample Grinding and Polishing Machine
Introduction:
YMP-2A is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has two level four speeds, which is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
YMP-2B Metallographic Sample Grinding and Polishing Machine
YMP-2B Metallographic Sample Grinding and Polishing Machine
Introduction:
YMP-2B is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. With double-disc and double-speed, it is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
YMP-2T-300/250 Metallographic Sample Grinding and Polishing Machine
YMP-2T-300/250 Metallographic Sample Grinding and Polishing Machine
Introduction:
This model is a single-chip microcomputer controlled grinding and polishing machine, two discs are independently controlled. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance.
YMP-300 Unitized Metallographic Sample Grinding and Polishing Machine
YMP-300 Unitized Metallographic Sample Grinding and Polishing Machine
In the metallographic sample preparation, pre-grinding, polishing and grinding are the indispensable procedures, which are usually finished by grinding and polishing machines. According to the actual requirement of laboratory and the customers’ requests, we design YMP-300 unitized metallographic sample grinding and polishing machine. The machine has beautiful appearance, the whole structure and sewage collection disc are made of stainless steel and the cover is made of ABS. The machine is very easy to use, first paste the abrasive paper and polishing cloth on the plate, when using only need to change the plate which saves the time and select the rotating speed, it can do coarse grinding, fine grinding, dry grinding, wet grinding, etc. The machine rotates steadily with large transmission power and low noise, can be adapted to various kinds of materials and improve the grinding and polishing quality and efficiency of samples, and therefore it is the ideal equipment for metallographic sample preparation. (It can be customized according to the customers’ requests.)
YMPZ-1 Automatic Metallographic Sample Grinding and Polishing Machine
YMPZ-1 is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has stepless speed or four speed control and can change the rotational direction. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. With magnetic grinding disc design, it supports for fast disc replacing system. The disc surface is Teflon painted which makes no residue of changing abrasive paper and polishing cloth. With the automatic locking and timing function of the grinding head, the operation is safe and convenient. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
YMPZ-2 Automatic Metallographic Sample Grinding and Polishing Machine
YMPZ-2 Automatic Metallographic Sample Grinding and Polishing Machine
This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. It is stepless speed control and can change the rotational direction. The grinding head has individual pressure and central pressure two methods. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
YMPZ-2B-300 bench type grinding and polishing machine
YMPZ-2B-300 bench type grinding and polishing machine is a grinding and polishing equipment controlled by single chip microcomputer. It is designed with two independent discs. The left disc is designed with a magnetic disc, which supports rapid disc change. The surface of the chassis and backing disc is treated with Teflon, and there is no adhesive residue of sandpaper cloth; The right disc adopts a grinding wheel system to realize the automatic rough grinding of the sample. The machine body is made of ABS material, with novel and beautiful appearance, corrosion resistance and durability. The grinding disc is made of aluminum alloy die-casting, with oxidation resistance, no deformation, stepless speed regulation and support for forward and reverse rotation.
YMPZ-2T-300/250 Automatic Metallographic Sample Grinding and Polishing Machine
YMPZ-2T-300/250 Automatic Metallographic Sample Grinding and Polishing Machine
Introduction:
This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. It is stepless speed control and can change the rotational direction. The grinding head has individual pressure and central pressure two methods. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
YPG-1B Metallographic Sample Polishing Machine
YPG-1B Metallographic Sample Polishing Machine
During the metallographic sample preparation, polishing is the primary working procedure. After polished on the polishing machine, the sample surface could be very bright like mirror. YPG-1B is designed according to the customers’ requests, the cover is made of ABS, and it works steadily with low noise, easy to use and maintain. The size of the disc and the transmission power are larger than the same products in the market, which can meet the polishing requirements for more materials. It is equipped with the polishing water supply system, which is the ideal equipment for metallographic sample polishing.
YZXQ-1 Automatic Metallographic Sample Mounting Press
YZXQ-1 Automatic Metallographic Sample Mounting Press
Automatic Metallographic Sample Mounting Press is used to mosaic small specimens, specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallographic or rock specimens. The mosaic operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallographic microscope. The machine is heated, and intensified with pressure automatically. After the formation of the specimen under pressure, it stops the operation and discharges the pressure also in an automatical way. With another press of the knob, the machine automatically turns up the specimen, which may be taken away. Note: It is only for the hot solid materials (such as urea-formaldehyde molding powder and bakelite powder) with the temperature automatically regulated and controlled.
YZXQ-1A Automatic Single Head Mounting Press
YZXQ-1A Automatic Single Head Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-1A is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process.
YZXQ-2 Automatic Metallographic Sample Mounting Press
YZXQ-2 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-2 is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts hydraulic pump with higher pressure, which makes the sample more compact. Unique cold and heat separation design makes it more safe and stable. High-definition touch screen displays pressure and temperature in real time. The water cooling system makes sample preparation fast and the special rotary locking design makes operation more convenient. With stable and reliable performance, it is the ideal equipment for sample mounting.
YZXQ-2A automatic single head mounting press
YZXQ-2A automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
YZXQ-3 automatic single head mounting press
YZXQ-3 automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
ZDD-1 Automatic Dropping Device
ZDD-1 Automatic Dropping Device
In the metallographic sample preparation, pre-grinding, polishing and grinding are the indispensable procedures. The suspension needs to drop in the process of grinding and polishing, so this dropping device is just designed for the automatic dropping of the suspension. This machine is controlled by single chip microcomputer, and it is output by a precise peristaltic pump. The touch panel displays and controls the input speed. The motor is the 24V DC brush motor, used for a long time, and can completely replace the artificial drops. It has reached the purpose of timing and uniform output of the suspension. The machine can adapt to the output of various suspensions and can be used for various grinding and polishing machines. Its easy operation, compact appearance and safety make it the best ancillary equipment for metallographic sample preparation.
ZDQ-500 automatic metallographic cutting machine
ZDQ-500
This machine is a metallographic sample cutting machine automatically controlled by PLC. The control system and servo motor are made of Mitsubishi brand. The X, y and Z directions are automatically and precisely controlled. The intelligent cutting can change the feed amount according to the material hardness to achieve rapid cutting effect. The cutting speed is controlled by frequency conversion, which has very high reliability and control ability.
ZHV2.0 automatic micro Vickers hardness tester
ZHV2.0 automatic micro Vickers hardness tester
Test force gf 10gf, 25gf, 50gf, 100gf, 200gf, 300gf, 500gf, 1000gf
N 0.098N, 0.246N, 0.49N, 0.98N, 1.96N, 2.94N, 4.90N, 9.80N
ZMPJ-1-350 automatic grinding machine
ZMPJ-1-350 automatic grinding machine
- the whole machine adopts high-definition LCD touch screen for control and display, which is easy to operate, clear and intuitive
- center pressure and single point pressure are two operation modes, and the most appropriate mode can be selected according to the working conditions
- the sample chuck can be loaded, unloaded and converted quickly, and the chuck with different diameters can be used flexibly
- automatic grinding system, with fixed time and speed, and automatic opening and closing function of water system, effectively replacing manual operation
- automatic locking function of grinding head electromagnetic lock, safe and convenient
- DC brushless motor, long service life, ultra quiet experience
- it can store more than ten programs and set different parameters for different samples
- equipped with diamond grinding needle, which can flatten the surface of the grinding wheel and improve the utilization rate of the grinding wheel
- the half rotation design of the sample clamping plate, combined with the inner lighting system, is convenient for taking and placing samples
ZPG-300 Vibratory Polishing Machine
ZPG-300 Vibratory Polishing Machine
Vibratory polishing is a kind of technology to minimize the wear of samples. It is suitable for preparing high quality polished surfaces on various materials, including the application of electron back scatter diffraction (EBSD). ZPG-300 adopts the spring plate and magnetic suction motor to produce vibration in the left and right directions, but the spring plate connecting the polishing disc and the vibratory body has an angle, which makes the sample move circularly on the polishing disc. Unlike traditional vibratory polishing machines, it can make horizontal vibration and maximum increase the contact time with the polishing cloth, which would not generate damage layer and deformation layer. It can effectively remove and avoid the characteristics of floating, embedded and plastic rheological defects. The shell of the machine is formed with ABS material which is novel and beautiful. The vibratory frequency can be adjusted automatically according to the working voltage, which is easy to operate. It can place multiple samples at one time, after setting parameters the user can leave and wait for the samples to finish the vibratory polishing automatically. With the final polishing suspension, it can effectively remove the final thin deformed layer on the surface of the sample and improve the light reflectivity of the sample surface to obtain the perfect metallographic observation image. It is the ideal choice for final physical polishing.
ZQ-100A MANUAL/AUTOMATIC
ZQ-100A MANUAL/AUTOMATIC
METALLOGRAPHIC SPECIMEN CUTTING MACHINE
This machine consists of machine body, electrical control box, cutting chamber, motor, cooling system and cutting wheel, etc. It is equipped with quick clamper and the cooling system can cool down the sample during cutting process so as to avoid damage to the metallographic structure of specimen because of overheat. It is available to choose three different kinds of cutting modes according to different samples, it can also preset cutting speed and cutting travel, which improves the sample cutting quality a lot. This machine can be operated in manual or automatic cutting modes and equipped with safety protection function. The prompt of running state is convenient for human-machine conversation, large volume cutting chamber is easy for user to operate. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
ZXQ-1 Automatic Metallographic Sample Mounting Press
ZXQ-1 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. ZXQ-1 automatic metallographic sample mounting press adopts automatic mechanical pressure. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts gear motor with stable pressure, and the water cooling system makes sample preparation fast. With stable and reliable performance, it is the ideal equipment for sample mounting.
ZXQ-2O Automatic Mounting Press Machine
ZXQ-2O is suitable for tiny or irregular metallorgraphic, lithofacies specimen to be mounted so that the sample will be cut or grinded and polished, and then metallography, spectral measurement or hardness testing. This, machine adopts 7’’big LCD screen display, which has the function of real-time temperature, holding time, cooling temperature. The complete process which is heating, constant pressure, cooling and sample preparation is controlled bu the CPU. The equipment can automatically press, heat and set the temperature condition in a minute. It is easy for us to operate the equipment with the stop button. After the sample preparation, the equipment may show prompt alarm and automatic pressure relief, automatic cooling, which can achieve the idea effect. It is one necessary equipment in laboratory of colleges, research institutes and factories.
ZXQ-3 automatic metallographic specimen mounting press
ZXQ-3 automatic metallographic specimen mounting press
This automatic mounting press is used to inlay small specimens, specimens in irregular shapes, or specimens which are not easy to take up, it is the preceding process before grinding and polishing metallurgical or rock specimens. The inlaying operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallurgical microscope.
