Fast delivery
Sea&Air
XYX-MD100 metallurgical microscope
XYX-MD100 metallurgical microscope is a multi-purpose industrial inspection optical instrument. It is equipped with bright or dark field objectives, wide field eyepieces and integrated polarization observation device, the Kohler illuminator is used in the transmitted and reflected illuminating system, the whole field is clear and uniformity. It is suitable for inspecting, such as semiconductor silicon wafer, LCD floor plate, electrocircuit plate, solid powder and all kind of industry sample that translucent or opaque. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc.
Features
- Adopt infinity optical system and modularization function design.
- Long W.D bright or dark field plan objectives (no cover glass), the field of view is widely and clear.
- Wide-field plan eyepieces: field number Ф22mm.
- Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
- Integrated polarization observation device, the polarizer can be circumrotated for 360°.
- The Epi-illumination is 12V 50W halogen lamp and the lamp box cover can be revolved, replacing lamp facility and safety. The transmitted illumination is 12V 30W halogen lamp and adding radiator.
- Trinocular can be observation for eyepieces and microphotography in 100% light flux, suits for dark field microphotography.
Y-FM upright metallurgical microscope
Y-FM is a compact and versatile detecting Microscope system. Broght field dark field,polarization and DIC is available.Various Illuminations:150W halogen and 40W LED cold light,connecyed by fiber.With big base and extral long pole,convenient for observation of big size LCD panel,PCB and thick sample.
Y-I1 upright metallurgical microscope
Y-I1 metallurgical microscope
Big Stage with Extra Large Moving Range 250X200mm.
It is widely used in IT Industry for Large Area Integrate Circuit, Wafer Observation and Inspection.
Excellent Optical Quality with Infinite Optical System and LWD High Magnification Objective(40X/WD2.9mm).
Stage Speedy Movement by Hand to Get Observation Point Immediately.
Comfortable and Enjoyable Operation with Low and Pre Position Control Knob.
Y-ZM1 upright metallurgical microscope
Excellent infinite Optical System.
High Magnification Objective with Long Working Distance.
Comfortable and Enjoyable Operation with low and Repetitive Position Control knob.
Easy, Safe and Reliable Lamp Replacement Device.
The Microscope is widely used for PCB board, LCD display and metal structure observation and inspection.
With Ingenious stand and convenient operation, it will be your best choice.
YM-1 Metallographic Sample Pre-grinder
YM-1 Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1 is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
YM-1A Metallographic Sample Pre-grinder
YM-1A Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
YM-1B metallographic sample pre grinding machine
YM-1B metallographic sample pre grinding machine
- single disk desktop design, easy to operate
- provide water supply system for wet grinding to prevent damage to metallographic structure due to sample overheating
- ABS materials are integrated and visualized
- stable transmission, low noise, convenient operation and maintenance
YM-2A Metallographic Sample Pre-grinder
YM-2A Metallographic Sample Pre-grinder
During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-2A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
