Fast delivery
Sea&Air
MIC-L342 Ultrasonic Thickness Tester
MIC-L342 Ultrasonic Thickness Tester
Function & Feature:
Built-in rapid thermal printer.
Automatic proofreading zero, on the system error correction.
Data transmission: RS232 interface, can be connected to the PC.
The unit of measurement, metric, inch optional.
A two-point calibration, can improve the accuracy of measurement
Rechargeable NI-MH battery.
MIC-L352 Ultrasonic Thickness Tester
MIC-L352 Ultrasonic Thickness Tester
Function & Feature:
Built in rapid thermal printer.
Automatic proofreading zero, on the system error correction.
Data transmission: RS232 interface, can be connected to the PC.
The unit of measurement, metric, inch optional.
A two-point calibration, can improve the accuracy of measurement.
Rechargeable Lithium battery.
Battery information indicates the rest capacity of the battery,Auto sleep and auto power off function to conserve
battery life.
MIC-L430/431 Surface Roughness Tester
MIC-L430/431 Surface Roughness Tester
Function & Feature: High accuracy inductance probe, Optional printer, analysis software and measurement platform. Design of mechanical and electrical integration is adopted to achieve small bulk, light weight. Surface roughness of various machine parts can be measured. High precision inductance sensor. Can measure 13 parameters.
MIC-L432 Surface Roughness Tester
MIC-L432 Surface Roughness Tester
MIC-L450/L451/452 Surface Roughness Tester
MIC-L450/L451/452 Surface Roughness Tester
Function & Feature:
Metal case, stronger and anti-electromagnetic interference .
Adapts high speed DSP processor to get fast reaction .
OLED color display, high light, no visual angle and wide temperature, could be used at each workplace .
Built-in lithium ion chargeable battery
USB for connecting with PC or charging .
LCD display.
MIC-L500 ultrasonic flaw detector
MIC-L500 ultrasonic flaw detector
Main Function
Probe automatic calibration
Automatically form DAC, AVG curve by using standard test block
Display the echo parameters (depth D, level P, the distance S, the amplitude H);
16 independent detecting channels,can enter and store any industrial standards;
Storage: 980 pieces of A-scan images;
Four kinds (I, V, U, X type) of weld viewing function, easy judgment of reflecting position;
Automatically calculate the φ value equivalent defects;
High sampling rate, low noise;
Two probes: single crystal probe, double-crystal probe;
USB interface, PC software is convenient for data exchange, statistical analysis and printing.
MIC-L510 Digital Ultrasonic Flaw Detector
MIC-L510 Digital Ultrasonic Flaw Detector
Main Function
With high-precise positioning, it meets requirements of close and distant detection;
Small blind near-field allows the detection of small diameter, thin-walled tube;
Automatic calibration: with one-button automatic calibration, convenient operation, automatically testing the "zero", "K value", "forward" of the probe and "speed of sound" of the materials;
MIC-L610/MIC-L610A Magnetic Defect Detector
MIC-L610/MIC-L610A Magnetic Defect Detector
Function & Feature: With LED light, which have a longer service life and can be changed conveniently. Small volume, light weight, large lifting force, and adaptable joint. Fit to be used for the detecting of the weld bead, steel pipe, pressure vessel, and the parts with complicated figure. AC and DC. Lithium Battery, Charging time is about 3 to 5 hours, then can be used for about 6-8 hours continuously. This model has applied for national patent technology , prohibit other company to imitate.
MIC-L610C Magnetic Defect Detector
MIC-L610C Magnetic Defect Detector
Function & Feature:
A special instrument for small portable nondestructive testing, nondestructive testing instrument i small principle design using magnetized workpiece into the crack.
Stable and reliable performance and convenient operation.
This product uses the coil wound on the probe directly on the induced magnetic field, magnetization, workpiece.
MIC-LBG32 belt grinding machine
This machine is of new generation design, made according to international standard and advanced process technique. Grinding and polishing the specimens with belt. You can change the different belts in easy and efficient way. The machine can replace those grinding wheel machine and pre-grinder. It adopts manual abrasive paper grinding and each belt can finish operation within 1-2 minutes. It is economical to save time, effort and abrasive paper if grinding the spectroscopy specimens.
MIC-LDQ 350A cutter
This machine is a kind of large automatic/manual metallographic cutting machine,which adopts Siemens PLC, high reliability, and strong controlling ability.The machine has touch-screen in the human-computer interaction aspects and has high precision stepper motor.The machine is suitable for cutting various metal,non-metallic materials,in order to observe the material metallographic,core organization.It is one of the important equipment in the labs.
MIC-LDQ-250 cutter
The machine is a manual/automatic integrated metallographic cutter, with high reliability and strong control ability. The machine can cut the samples of metal and non-metal materials, so as to observe metallographic and petrographic structure of the materials. The machine, featured by manual/automatic interchange, low noise, easy operation, safety and reliability, is an indispensable equipment in making samples of solid materials in modern labs.
MIC-LDQ-350 Metallographic cutting machine
MIC-LDQ-350 Manual cutting machine is designed and manufactured according to the European health and safety standards. The series of machines consist of controlling system,cutting systems,lighting system,cooling system and cleaning system.Super cooling system can make workpiece avoid while cutting.Imported switch and the safty of the operators.LDQ-350 Manual cutting machine owns the scientific designs of pulling bar that makes the large workpiece cut freely.
MIC-LDQ-450 cutter
The machine is a large automatic metallographic cutter. The machine has a Siemens programmable controller with high reliability and strong control ability, a human machine interface with touch screen, and a control system with high-accuracy stepper motor. The machine can cut the samples of metal and non-metal materials, so as to observe metallographic and petrographic structure of the materials. The machine, featured by automatic cutting, low noise, easy operation, safety and reliability, is an indispensable equipment in making samples of solid materials in modern labs.
MIC-LSQ-100 cutter
The machine is suitable for cutting various metal, non-metallic materials, in order to observe the material metallographic core organization. This machine has high performance, low noise, enclosed motor, cooling system, large cutting room, and illumination waterproof lamp.It is easy to use for users. It is an ideal equipment for factories scientific research institution and colleges and universities laboratory.
MIC-P-1 METALLOGRAPHIC SPECIMEN POLISHING MACHINE
In the course of metallographic sample preparation, the polishing of the sample is one of main operations. The sample through grinding and polishing is bright like a mirror. P-1 type metallographic sample polishing machine is a kind of classical polishing machine, featured by stable transmission, low noise, easy operation and maintenance, etc., and applicable to polishing of various materials. The machine is applicable to the metallographic labs of plants, research institutes and universities and colleges.
MIC-P-2 METALLOGRAPHIC SPECIMEN POLISHING MACHINE
In the course of metallographic sample preparation, the polishing of the sample is one of main operations. The sample through grinding and polishing is bright like a mirror. P-2 type metallographic sample polishing machine is a kind of classical polishing machine, featured by stable transmission, low noise, easy operation and maintenance, etc., and applicable to polishing of various materials. The machine is applicable to the metallographic labs of plants, research institutes and universities and colleges.
MIC-P-2G METALLOGRAPHIC SPECIMEN POLISHING MACHINE
In the course of metallographic sample preparation, the polishing of the sample is one of main operations. The sample through grinding and polishing is bright like a mirror. P-2 type metallographic sample polishing machine is a kind of classical polishing machine, featured by stable transmission, low noise, easy operation and maintenance, etc., and applicable to polishing of various materials. The machine is applicable to the metallographic labs of plants, research institutes and universities and colleges.
MIC-P-2T METALLOGRAPHIC SPECIMEN POLISHING MACHINE
In the course of metallographic sample preparation, the polishing of the sample is one of main operations. The sample through grinding and polishing is bright like a mirror. P-2 type metallographic sample polishing machine is a kind of classical polishing machine, featured by stable transmission, low noise, easy operation and maintenance, etc., and applicable to polishing of various materials. The machine is applicable to the metallographic labs of plants, research institutes and universities and colleges.
MIC-Q-100C cutter
This machine is an automatic/manual metallographic cutting machine. The machine adopts Siemens PLC with a very high reliability, strong control ability. In the aspect of human-computer interaction. It uses the display screen. Meanwhile the machine uses the high precision motor, suitable for cutting various metal, nonmetal material samples in order to observe the metallographic, petrographic structure. The cutting process is automatic/manual interchangeable, low noise, easy operation, safety and reliability. So it is one of the important equipment in modern laboratory of solid material sample.
MIC-Q-2 cutter
This machine uses high speed rotation of the thin grinding wheel to cut metallographic specimen, suitable for cutting hard metal materials. The machine has a cooling device, taking away the heat produced during the cutting, to avoid overheating and change tissue.
MIC-Q-2A cutter
This machine uses high speed rotation of the thin grinding wheel to cut metallographic specimen, suitable for cutting hard metal materials. The machine has a cooling device, taking away the heat produced during the cutting, to avoid overheating and change tissue.
MIC-Q-3A cutter
The machine can cut the samples of metal and non-metal materials, so as to observe metallographic and petrographic structure of the materials. Its cooling device uses well-formulated cooling liquid to take away the heat during cutting, thus preventing the damage caused by overheat of the sample. The machine, easy to use, safe and reliable, is an indispensable sample preparation equipment for the labs of plants, research institutes and universities and colleges.
MIC-Q-80Z-100B cutter
The machine can cut irregular (cylinder, polygon, etc.) metallographic sample materials, so as to observe metallographic and petrographic structure of the materials. The machine uses dual-housing fully-enclosed structure, ensuring absolute safety in cutting samples. Its cooling device uses well-formulated cooling liquid to take away the heat during cutting, thus preventing the damage caused by overheat of the sample. The cutting sample can be regulated its angles, which prevents tiny burning of sample surface when the sample is cut down, and also increases cutting section and enhances utilization ratio of abrasive disc. The machine, easy to use, safe and reliable, is an indispensable sample preparation equipment for the labs of plants, research institutes and universities and colleges.
MIC-QG-4 Metallographic Sample Cutting Machine
MIC-QG-4 Metallographic Sample Cutting Machine
Product Description
The machine is suitable for cutting the cylinder, irregular general metallographic specimen material such as polygon, so as to observe material metallographic core organization. The machine covers double shell in enclosed structure so as to guarantee absolute security under the sample cutting. The machine has strong cooling system so as to take away the heat produced during the cutting. When cutting, we can arbitrarily rotate the angle, avoiding the burns on the surface of the sample. Meanwhile it increases the cutting section to improve the utilization rate of the cutting disc. It is easy to use for users. It is an ideal equipment for factories, scientific research institution and colleges and universities laboratory.
MIC-QG-4A Metallographic Sample Cutting Machine
The machine is suitable for cutting metallographic specimen material so as to observe material metallographic core organization. The machine covers double shell in enclosed structure so as to guarantee absolute security under the sample cutting. The machine has strong cooling system so as to take away the heat produced during the cutting. It is easy to use for users. It is an ideal equipment for factories, scientific research institution and colleges and universities laboratory.
MIC-YM1 pre-grinder
The pre-grinding machine is a single-disc desktop, applicable to rough grinding, semi-accurate grinding and accurate grinding of metallographic sample. The machine is an indispensable equipment in making the metallographic sample. The machine has a cooling device to cool the sample during pre-grinding, thus preventing the damage of the metallographic structure caused by overheat of the sample. The machine, easy to use, safe and reliable, is an ideal sample preparation equipment for the labs of plants, research institutes and universities and colleges.
MIC-YM2 pre-grinder
In the course of metallographic sample preparation, the pre-grinding of the sample is indispensable before polishing. The pre-grinding can promote the effect of sample preparation. M-2 metallographic pre-grinding machine is designed on basis of suggestions and requirements from various users. The machine is equipped with handsome practical FRP casing and stainless steel standard parts, which greatly enhances its serviceability and makes it into an ideal pre-grinding machine of samples.
MIC-ZXQ-5 mounting machine for metallographic specimen
MIC-ZXQ-5 mounting machine for metallographic specimen
Description
This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.
MIC-ZXQ-5O mounting machine for metallographic specimen
Application
The sample inlaying machine can inlay improper samples in shape or size to meet the following sampling steps, to obtain required inspection surface, or to protect edges or surface defects caused in the course of sample preparation. In modern metallographic labs, semi-automatic or automatic grinding/polishing machines have a certain requirement in sample size, so the samples must be inlayed. The sample inlaying machine is an indispensable equipment in the metallographic labs.
The machine is an automatic metallographic sample inlaying machine with cooling function, applicable to thermal inlaying of all materials (thermoset and thermoplasticity). Set inlaying parameters such as heating temperature, heat holding time, acting force, etc., put sample and inlaying materials, close the gland, press down the button, and then the machine can inlay automatically without a watchman. The machines may change four kinds of dies at will according to various requirements of samples, and also can press two samples simultaneously.
MIC-ZXQ-5s mounting machine for metallographic specimen
MIC-ZXQ-5s mounting machine for metallographic specimen
Description
This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.
MO-1 Metallographic specimen mounting press
MIC-MO-1 Metallographic specimen mounting press is suitable for the thermo-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take. After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of metallographic structure under metallographic microscope. The machine may work stable under the following working condition:
The temperature of surrounding medium can not be less than 10 °C and more than 40 °C
The relative humidity of air should be no more than 85% (20 °C)
The voltage fluctuation should be no more than 15%
There should be no obvious vibration source around
There should be no current conducting dust, explosive and corrosive air.
MO-5 Metallographic specimen mounting press
MIC-MO-5 automatic metallographic specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermo hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
MO-6 Metallographic specimen mounting press
MIC-MO-6 is a new Touch screen type Automatic Metallographic specimen mounting press, all working procedures can be done automatically. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Mopao 1000 Automatic Grinding Polishing Machine
Mopao 1000 Automatic Grinding Polishing Machine
Product Description
MoPao1000 automatic grinding/polishing machine is made according to international standard and internationally advanced technology. Featured by high accuracy, stable reliable performance, easy operation, wide processing range, automatic operation, etc., the machine is an ideal metallographic processing instrument.
MoPao 1000B automatic grinder polisher
MoPao 1000B automatic grinder polisher
Application
Mopao 1000B Model automatic grinding/polishing machine adopt international advanced manufacturing technology in accordance with international standards. This series adopts the advanced microprocessor control system, which makes grinding disc and grinding head speed step less adjustable, sample preparation pressure, time setting. Operation can only change grinding disc and sandpaper fabric, showing wider applicability. The machine has the following features such as optional grinding disc rotation, quick-change grinding disc, vertical preparation fixture, pneumatic single point loading.
