显示 2053-2088 个结果（共 2130 个结果）

Show sidebar
Show 9 24 36
Close

XYX-M2020 upright metallurgical microscope

XYX-M2020 reflected and transmitted metallurgical microscope is equipped with reflected and transmitted illuminator system, plan achromatic objectives with long working distance (no cover glass), wide field eyepieces and set polarizer device in trinocular. They can obtain clean image in the wide visual field, can be broadly applied in mine, colleges and scientific research department to observe internal configuration of material. Features
  1. With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wideview field.
  2. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  3. Utilize reflected &transmitted light mix illumination; you can descry the special effect in some object.
  4. 6V 20W Halogen lamp, adjustable control.
  5. Trinocular, can switch to observe normally or to observe the Polarize, can send 100% of light to the binocular eyepieces or to thetop port.
阅读更多
Quick view
Close

XYX-M2030 upright metallurgical microscope

XYX-M2030 series reflected and transmitted metallurgical microscopes are suitable to observe surfaces of non-transparent object or transparent object. They are equipped with vertical illuminator and transmitted illuminator, plan achromatic objectives with long working distance (no cover glass), wide field eyepieces and set polarizer device in trinocular. They provide clear and high-contrast image, convenient control. They are the ideal instruments in research work in biology, metallography, mineralogy,precision engineering, electronics and etc. They are suitable for scientific research, teaching demonstration in the colleges and factory. Features
  1. With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures andwide view field.
  2. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  3. With vertical illuminator and transmitted illuminator, can observe surfaces of non-transparent object or transparent object.
  4. 6V 20W halogen lamp, brightness control.
  5. Trinocular, can switch to observe normally or to observe the Polarize, can send 100% of light to the binocular eyepieces or to thetop port.
阅读更多
Quick view
Close

XYX-M3003 upright metallurgical microscope

XYX-M3003 reflected metallurgical microscope is suitable to observe the surfaces of non-transparent object. It is equipped with vertical illuminator, plan achromatic objectives with long working distance (no cover glass), wide-field eyepieces and set polarizer device in trinocular. It provide clear and high-contrast picture, beautiful sculpt, convenient operation, etc. It is the ideal instruments for research work in metallography, mineralogy, precision engineering, electronics, etc. It is suitable for scientific research, teaching demonstration in the colleges and factory. Features
  1. With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wide view field.
  2. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  3. 6V 20W halogen lamp, adjustable brightness.
  4. Trinocular, can switch to observe normally or to observe the polarize, can send 100% of light to the binocular eyepieces or to the top port
阅读更多
Quick view
Close

XYX-M302 industrial metallurgical microscope

XYX--M302 upright metallurgical microscope is suitable to observe surfaces of opaque object. It is equipped excellent UIS optical system and modularization function design so that update system expediently and achieved polarization, dark field observation. Compact and steady main frame body is embodiment for the shock resistance. The ideal ergonomic design is adopted in this unit and has easier operation and wider space. This is ideal optical instrument for micro observation in metallographic structure and surface morphology. It is suitable for research in metallography, mineralogy, precision engineering, etc. Features
  1. With long working distance plan achromatic objectives  (no cover glass) and wide-field eyepieces,can get clear pictures and wide view field
  2. With large move range mechanical stages,moving range:8"X8"(204mmX204mm)
  3. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of finefocusing: 0.8μm
  4. 6V 30W halogen lamp, adjustable brightnessTrinocular, can switch to normally/polarize observation, brightfield/darkfield observation. can send100% of light to the binocular eyepieces or to the top port
阅读更多
Quick view
Close

XYX-M302DIC industrial metallurgical microscope

XYX-M302 DIC differential interference contrast microscope is suitable to observe many different kinds of object. It is equipped with transmitted illuminator and reflected DIC system, infinity plan achromatic objectives with long working distance, wide-field eyepieces and polarizer device. It provides clear and 3D image, beautiful sculpt, convenient control, etc. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. Features
  1. Excellent UIS optical system can obtain excellent optical performance.
  2. Compact and steady main frame body is embodiment for theshock resistance.
  3. The large-mobile range mechanical stage is adapted to observation big size specimen or quick check.
  4. Modularization function design so that update system expediently and achieved polarization,DIC observation.
  5. Ideal ergonomic design is adopted in this unit and have easier operation and wider space.
阅读更多
Quick view
Close

XYX-M3030 upright metallurgical microscope

XYX-M3030 reflected and transmitted microscope is suitable to observe surfaces of non-transparent object or transparent object. It is equipped with vertical illuminator, plan achromatic objectives with long working distance (no cover glass), wide-field eyepieces and set polarizer device in trinocular. It provide clear and high-contrast image, beautiful sculpt, convenient control, etc. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. It is suitable for scientific research, teaching demonstration in the colleges and factory. Features
  1. With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wide view field.
  2. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  3. With vertical illuminator and transmitted illuminator, can observe surfaces of non-transparent object or transparent object.
  4. 6V 20W halogen lamp, adjustable brightness.
  5. Trinocular, can switch to observe normally or to observe the Polarize, can send 100% of light to the binocular eyepieces or to the top port.
阅读更多
Quick view
Close

XYX-M3203 upright metallurgical microscope

XYX-M3203 reflected metallurgical microscope is applicable to observe the opaque objects. It is equipped with Epi-illumination system, infinity plan achromatic and long working distance objectives, wide-field eyepieces and integrated polarizing device. It provides clear and good contrast picture, beautiful sculpt, convenient operation. It is the ideal instruments for research work in metallography, mineralogy, precision engineering, electronics, etc. It is suitable for scientific research, teaching demonstration in the colleges and factory. Features
  1. Adopt infinity optical system and modularization function design.
  2. Infinity long W.D plan objectives , the field of view is widely and clear.
  3. Wide-field plan eyepieces: field number Ф22mm.
  4. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  5. Integrated polarization observation device, the polarizer can be circumrotated for 360°.
  6. The Epi- illumination is 6V 30W halogen lamp and the lamp box cover can be revolved, replacing lamp facility and safety.
  7. Trinocular can be observation for eyepieces and microphotography in 100% light flux, suits for low illuminationmicrophotography.
阅读更多
Quick view
Close

XYX-M3230 upright metallurgical microscope

XYX-M3230 reflected and transmitted microscope is suitable to observe surfaces of non-transparent object or transparent object. It is equipped with vertical illuminator, infinity plan achromatic objectives with long working distance (no cover glass), wide-field eyepieces and set polarizer device in trinocular. It provides clear and high-contrast image, beautiful sculpt ,convenient control, etc. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. It is suitable for scientific research, teaching demonstration in the colleges and factory. Features
  1. With infinity plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wide view field.
  2. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm
  3. Movement of stage: 30mm
  4. With vertical illuminator and transmitted illuminator, can observe surfaces of non-transparent object or transparent
  5. Trinocular, can switch to observe normally or to observe the Polarize, can send 100% of light to the binocular eyepieces or to the top port.
阅读更多
Quick view
Close

XYX-M3230BD metallurgical microscope

XYX-M3230BD upright bight or dark transmitted or reflected light metallurgical microscope is a multi-purpose industrial inspection optical instrument. It is equipped with bright or dark field objectives, wide field eyepieces and integrated polarization observation device, the Kohler illuminator is used in the transmitted and reflected illuminating system, the whole field is clear and uniformity. It is suitable for inspecting, such as semiconductor silicon wafer, LCD floor plate, electrocircuit plate, solid powder and all kind of industry sample that translucent or opaque. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. Features
  1. Adopt infinity optical system and modularization function design.
  2. Long W.D bright or dark field plan objectives (no cover glass), the field of view is widely and clear.
  3. Wide-field plan eyepieces: field number Ф22mm.
  4. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  5. Integrated polarization observation device, the polarizer can be circumrotated for 360°.
  6. The Epi-illumination is 12V 50W halogen lamp and the lamp box cover can be revolved, replacing lamp facility and safety. The transmitted illumination is 12V 30W halogen lamp and adding radiator.
  7. Trinocular can be observation for eyepieces and microphotography in 100% light flux, suits for dark field microphotography.
阅读更多
Quick view
Close

XYX-M3230DIC metallurgical microscope

XYX-M3230 DIC differential interference contrast microscope is suitable to observe many different kinds of object. It is equipped with transmitted illuminator and reflected DIC system, infinity plan achromatic objectives with long working distance, wide-field eyepieces and polarizer device. It provides clear and 3D image, beautiful sculpt, convenient control, etc. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. Features
  1. Excellent UIS optical system can obtain excellent optical performance.
  2. Compact and steady main frame body is embodiment for theshock resistance.
  3. Modularization function design so that update system expediently and achieved polarization,DIC observation.
  4. Ideal ergonomic design is adopted in this unit and have easier operation and wider space.
阅读更多
Quick view
Close

XYX-MD100 metallurgical microscope

XYX-MD100 metallurgical microscope is a multi-purpose industrial inspection optical instrument. It is equipped with bright or dark field objectives, wide field eyepieces and integrated polarization observation device, the Kohler illuminator is used in the transmitted and reflected illuminating system, the whole field is clear and uniformity. It is suitable for inspecting, such as semiconductor silicon wafer, LCD floor plate, electrocircuit plate, solid powder and all kind of industry sample that translucent or opaque. It is the ideal instruments in research work in biology, metallography, mineralogy, precision engineering, electronics, etc. Features
  1. Adopt infinity optical system and modularization function design.
  2. Long W.D bright or dark field plan objectives (no cover glass), the field of view is widely and clear.
  3. Wide-field plan eyepieces: field number Ф22mm.
  4. Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
  5. Integrated polarization observation device, the polarizer can be circumrotated for 360°.
  6. The Epi-illumination is 12V 50W halogen lamp and the lamp box cover can be revolved, replacing lamp facility and safety. The transmitted illumination is 12V 30W halogen lamp and adding radiator.
  7. Trinocular can be observation for eyepieces and microphotography in 100% light flux, suits for dark field microphotography.
阅读更多
Quick view
Close

Y serials DIC microscope nosepiece

Y serials DIC microscope nosepiece

阅读更多
Quick view
Close

Y-FM upright metallurgical microscope

Y-FM is a compact and versatile detecting Microscope system. Broght field dark field,polarization and DIC is available.Various Illuminations:150W halogen and 40W LED cold light,connecyed by fiber.With big base and extral long pole,convenient for observation of big size LCD panel,PCB and thick sample.
阅读更多
Quick view
Close

Y-I1 upright metallurgical microscope

Y-I1 metallurgical microscope Big Stage with Extra Large Moving Range 250X200mm. It is widely used in IT Industry for Large Area Integrate Circuit, Wafer Observation and Inspection. Excellent Optical Quality with Infinite Optical System and LWD High Magnification Objective(40X/WD2.9mm). Stage Speedy Movement by Hand to Get Observation Point Immediately. Comfortable and Enjoyable Operation with Low and Pre Position Control Knob.
阅读更多
Quick view
Close

Y-ZM1 upright metallurgical microscope

Excellent infinite Optical System. High Magnification Objective with Long Working Distance. Comfortable and Enjoyable Operation with low and Repetitive Position Control knob. Easy, Safe and Reliable Lamp Replacement Device. The Microscope is widely used for PCB board, LCD display and metal structure observation and inspection. With Ingenious stand and convenient operation, it will be your best choice.
阅读更多
Quick view
Close

Y-ZM2/TRF Metallurgical microscope

Laboratory metallurgical microscope, including bright field, dark field and polarization observation system.Powerful transmitted and reflected system with Kohler illumination.
阅读更多
Quick view
Close

YFP single band Fluorescence Filter Set

YFP single band Fluorescence Filter Set

阅读更多
Quick view
Close

YM-1 Metallographic Sample Pre-grinder

YM-1 Metallographic Sample Pre-grinder During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1 is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
阅读更多
Quick view
Close

YM-1 Metallographic Sample Pre-grinder

YM-1 Metallographic Sample Pre-grinder
阅读更多
Quick view
Close

YM-1A Metallographic Sample Pre-grinder

YM-1A Metallographic Sample Pre-grinder During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-1A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
阅读更多
Quick view
Close

YM-1B metallographic sample pre grinding machine

YM-1B metallographic sample pre grinding machine
  1. single disk desktop design, easy to operate
  2. provide water supply system for wet grinding to prevent damage to metallographic structure due to sample overheating
  3. ABS materials are integrated and visualized
  4. stable transmission, low noise, convenient operation and maintenance
During the preparation of metallographic samples, the pre grinding of samples is an essential pre process before polishing. The samples after rough grinding, fine grinding and fine grinding can be effectively polished. Ym-1b metallographic sample pre grinding machine is a classic product. The shell is made of ABS material, with visual speed. It is equipped with a water supply system for wet grinding to prevent the metallographic structure from being damaged due to sample overheating. It has the advantages of stable transmission, low noise, convenient operation and maintenance, and is suitable for the pre grinding requirements of a variety of materials.   Grinding disc diameter:203mm speed:700r/min Direction: anti-clockwise Motor power:0.2kW Input power supply:220V, 50Hz Overall dimension (width * depth * height):380×640×260mm Net weight:30kg
阅读更多
Quick view
Close

YM-2A Metallographic Sample Pre-grinder

YM-2A Metallographic Sample Pre-grinder During the metallographic sample preparation, pre-grinding is the essential former procedure before polishing. The pre-grinding enhances greatly the efficiency of the sample preparation. YM-2A is designed according to the customers’ requests and adapted to various kinds of materials. The size of the disc and the transmission power are larger than the same products in the market, which is the ideal equipment for pre-grinding. Working principle: the water flows into the rotating grinding disc through the water tube, and then the water below the abrasive paper flows out under the centrifugal force of the rotating disk, which generates a vacuum space and presses the abrasive paper on the disc tightly to do the pre-grinding work. When the disc stops rotating, the effect disappears and the abrasive paper can be easily taken off.
阅读更多
Quick view
Close

YMP-1 Metallographic Sample Grinding and Polishing Machine

YMP-1 Metallographic Sample Grinding and Polishing Machine Introduction: YMP-1 is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has stepless speed or four speed control and can change the rotational direction. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
阅读更多
Quick view
Close

YMP-1A Metallographic Sample Grinding and Polishing Machine

YMP-1A Metallographic Sample Grinding and Polishing Machine Introduction: YMP-1A is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It can choose two speeds, which is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
阅读更多
Quick view
Close

YMP-1T-250 Metallographic Sample Grinding and Polishing Machine

YMP-1T-250 Metallographic Sample Grinding and Polishing Machine Introduction: This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience.
阅读更多
Quick view
Close

YMP-2 Metallographic Sample Grinding and Polishing Machine Stepless

YMP-2 Metallographic Sample Grinding and Polishing Machine Stepless Introduction: YMP-2 is a single-chip microcomputer controlled grinding and polishing machine, two discs are independently controlled. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance.
阅读更多
Quick view
Close

YMP-2A Metallographic Sample Grinding and Polishing Machine

YMP-2A Metallographic Sample Grinding and Polishing Machine Introduction: YMP-2A is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has two level four speeds, which is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
阅读更多
Quick view
Close

YMP-2B Metallographic Sample Grinding and Polishing Machine

YMP-2B Metallographic Sample Grinding and Polishing Machine Introduction: YMP-2B is a single-chip microcomputer controlled grinding and polishing machine, the shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. With double-disc and double-speed, it is easy to use. The grinding disc rotates stable with low motor noise. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.
阅读更多
Quick view
Close

YMP-2T-300/250 Metallographic Sample Grinding and Polishing Machine

YMP-2T-300/250 Metallographic Sample Grinding and Polishing Machine Introduction: This model is a single-chip microcomputer controlled grinding and polishing machine, two discs are independently controlled. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance.
阅读更多
Quick view
Close

YMP-300 Unitized Metallographic Sample Grinding and Polishing Machine

YMP-300 Unitized Metallographic Sample Grinding and Polishing Machine In the metallographic sample preparation, pre-grinding, polishing and grinding are the indispensable procedures, which are usually finished by grinding and polishing machines. According to the actual requirement of laboratory and the customers’ requests, we design YMP-300 unitized metallographic sample grinding and polishing machine. The machine has beautiful appearance, the whole structure and sewage collection disc are made of stainless steel and the cover is made of ABS. The machine is very easy to use, first paste the abrasive paper and polishing cloth on the plate, when using only need to change the plate which saves the time and select the rotating speed, it can do coarse grinding, fine grinding, dry grinding, wet grinding, etc. The machine rotates steadily with large transmission power and low noise, can be adapted to various kinds of materials and improve the grinding and polishing quality and efficiency of samples, and therefore it is the ideal equipment for metallographic sample preparation. (It can be customized according to the customers’ requests.)
阅读更多
Quick view
Close

YMPZ-1 Automatic Metallographic Sample Grinding and Polishing Machine

YMPZ-1 is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. Strong large support chassis design ensures the precision rotary balance. It has stepless speed or four speed control and can change the rotational direction. The motor is DC brushless motor which has long service life and low noise and powerful motor brings strong power and efficient grinding and polishing experience. Spindle leak-proof design ensures the bearing without damage. It can adjust the cooling water tube direction for wet grinding. With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials. With magnetic grinding disc design, it supports for fast disc replacing system. The disc surface is Teflon painted which makes no residue of changing abrasive paper and polishing cloth. With the automatic locking and timing function of the grinding head, the operation is safe and convenient. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
阅读更多
Quick view
Close

YMPZ-2 Automatic Metallographic Sample Grinding and Polishing Machine

YMPZ-2 Automatic Metallographic Sample Grinding and Polishing Machine This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. It is stepless speed control and can change the rotational direction. The grinding head has individual pressure and central pressure two methods. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
阅读更多
Quick view
Close

YMPZ-2B-300 bench type grinding and polishing machine

YMPZ-2B-300 bench type grinding and polishing machine is a grinding and polishing equipment controlled by single chip microcomputer. It is designed with two independent discs. The left disc is designed with a magnetic disc, which supports rapid disc change. The surface of the chassis and backing disc is treated with Teflon, and there is no adhesive residue of sandpaper cloth; The right disc adopts a grinding wheel system to realize the automatic rough grinding of the sample. The machine body is made of ABS material, with novel and beautiful appearance, corrosion resistance and durability. The grinding disc is made of aluminum alloy die-casting, with oxidation resistance, no deformation, stepless speed regulation and support for forward and reverse rotation.
阅读更多
Quick view
Close

YMPZ-2T-300/250 Automatic Metallographic Sample Grinding and Polishing Machine

YMPZ-2T-300/250 Automatic Metallographic Sample Grinding and Polishing Machine Introduction: This model is a single-chip microcomputer controlled grinding and polishing machine. The shell is formed with ABS material, which is beautiful in appearance, anti-corrosion and durable. It is stepless speed control and can change the rotational direction. The grinding head has individual pressure and central pressure two methods. This machine can effectively replace the manual grinding and polishing processes, which greatly saves labor and improves the quality of grinding and polishing and the efficiency of sample preparation. Therefore it is the ideal equipment for the metallographic sample preparation.
阅读更多
Quick view
Close

YPG-1B Metallographic Sample Polishing Machine

YPG-1B Metallographic Sample Polishing Machine During the metallographic sample preparation, polishing is the primary working procedure. After polished on the polishing machine, the sample surface could be very bright like mirror. YPG-1B is designed according to the customers’ requests, the cover is made of ABS, and it works steadily with low noise, easy to use and maintain. The size of the disc and the transmission power are larger than the same products in the market, which can meet the polishing requirements for more materials. It is equipped with the polishing water supply system, which is the ideal equipment for metallographic sample polishing.
阅读更多
Quick view
Close

YX-P800M polarizing microscope

Supply high quality and contrast image with special strain free objective. Single polarization, orthogonal polarization and conoscopic observation. Transmitted light and reflect light, 24V/100W long life halogen lamp. Stage with 45°located, attachable mechanical stage with large moving range, high efficiency by no interference when turning objectives. Professional polarizing microscope for geology, petroleum, chemicals, polymer, LED field
阅读更多
Quick view