Supply high quality and contrast image with special strain free objective.
Single polarization, orthogonal polarization and conoscopic observation.
Transmitted light and reflect light, 24V/100W long life halogen lamp.
Stage with 45°located, attachable mechanical stage with large moving range, high efficiency by no interference when turning objectives.
Professional polarizing microscope for geology, petroleum, chemicals, polymer, LED field
Supply high quality and contrast image with special strain free objective.
Single polarization, othorgonal polarization and conoscopic observationon.
Transmitted light and reflect light, 24V/100W long life halogen lamp.
Stage with 45°located, attachable mechanical stage with large moving range, high efficiency by no interference when turning objectives.
YZXQ-1Automatic Metallographic Sample Mounting Press
Automatic Metallographic Sample Mounting Press is used to mosaic small specimens, specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallographic or rock specimens. The mosaic operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallographic microscope. The machine is heated, and intensified with pressure automatically. After the formation of the specimen under pressure, it stops the operation and discharges the pressure also in an automatical way. With another press of the knob, the machine automatically turns up the specimen, which may be taken away. Note: It is only for the hot solid materials (such as urea-formaldehyde molding powder and bakelite powder) with the temperature automatically regulated and controlled.
YZXQ-1A Automatic Single Head Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-1A is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process.
YZXQ-2 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-2 is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts hydraulic pump with higher pressure, which makes the sample more compact. Unique cold and heat separation design makes it more safe and stable. High-definition touch screen displays pressure and temperature in real time. The water cooling system makes sample preparation fast and the special rotary locking design makes operation more convenient. With stable and reliable performance, it is the ideal equipment for sample mounting.
YZXQ-2A automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
YZXQ-3 automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
ZDD-1 Automatic Dropping Device
In the metallographic sample preparation, pre-grinding, polishing and grinding are the indispensable procedures. The suspension needs to drop in the process of grinding and polishing, so this dropping device is just designed for the automatic dropping of the suspension. This machine is controlled by single chip microcomputer, and it is output by a precise peristaltic pump. The touch panel displays and controls the input speed. The motor is the 24V DC brush motor, used for a long time, and can completely replace the artificial drops. It has reached the purpose of timing and uniform output of the suspension. The machine can adapt to the output of various suspensions and can be used for various grinding and polishing machines. Its easy operation, compact appearance and safety make it the best ancillary equipment for metallographic sample preparation.
ZDQ-500
This machine is a metallographic sample cutting machine automatically controlled by PLC. The control system and servo motor are made of Mitsubishi brand. The X, y and Z directions are automatically and precisely controlled. The intelligent cutting can change the feed amount according to the material hardness to achieve rapid cutting effect. The cutting speed is controlled by frequency conversion, which has very high reliability and control ability.
the whole machine adopts high-definition LCD touch screen for control and display, which is easy to operate, clear and intuitive
center pressure and single point pressure are two operation modes, and the most appropriate mode can be selected according to the working conditions
the sample chuck can be loaded, unloaded and converted quickly, and the chuck with different diameters can be used flexibly
automatic grinding system, with fixed time and speed, and automatic opening and closing function of water system, effectively replacing manual operation
automatic locking function of grinding head electromagnetic lock, safe and convenient
DC brushless motor, long service life, ultra quiet experience
it can store more than ten programs and set different parameters for different samples
equipped with diamond grinding needle, which can flatten the surface of the grinding wheel and improve the utilization rate of the grinding wheel
the half rotation design of the sample clamping plate, combined with the inner lighting system, is convenient for taking and placing samples
Large Superfine black ceramictop plate 470 X 150 X 20MM for heating and stirring 5x 250ml at the same time
Built-in PID electronic controller !
Designed for stirring and heating of liquid . Built-in temperature control maintains element temperature from ambient to 350°C ! Stirring is Independently controlled with a variable speed control up to 1800rpm .
LCD Display for Temperature set ,reduce , add stir speed .
Heat only, stir only or heat and stir together function .
Electronic speed control for constant speed even during change in load .
products features :
1) Exclusively using aluminium made bowl to heat, unique heating mode (patent applied for ),can water bath at 100°C or oil bath at 250°C to heat .
2) Temperature control adopts PID control algorithm, with double screen digital display, self adjustment function, high precision, small temperature difference, one-button tick operating, use inner and outer thermocouples to measure temperature, controlled silicon manage the output, 160-240V wide voltage power supply and with Broken accidentally protection function.
products features :
1) Exclusively using aluminium made bowl to heat, unique heating mode (patent applied for ),can water bath at 100°C or oil bath at 250°C to heat .
2) Temperature control adopts PID control algorithm, with double screen digital display, self adjustment function, high precision, small temperature difference, one-button tick operating, use inner and outer thermocouples to measure temperature, controlled silicon manage the output, 160-240V wide voltage power supply and with Broken accidentally protection function.
products features :
1) Exclusively using aluminium made bowl to heat, unique heating mode (patent applied for ),can water bath at 100°C or oil bath at 250°C to heat .
2) Temperature control adopts PID control algorithm, with double screen digital display, self adjustment function, high precision, small temperature difference, one-button tick operating, use inner and outer thermocouples to measure temperature, controlled silicon manage the output, 160-240V wide voltage power supply and with Broken accidentally protection function.
Heating Mantles are manufactured to the highest quality in China manufacturing facility .Our heating mantles made of alkali-free glass fiber insulation material, the Cr20Ni80 alloy wire spring installed in them, with aluminum silicate cotton by the vacuum shape of the hemispherical insulation body insulation. Each mantle is made with extreme care and is hand sewn to assure its reliability, quality and safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. All AIBOTE mantles go through the 'burn off' procedure at the end of the manufacturing process enabling use straight out of the box.
Heating Mantles are manufactured to the highest quality in China manufacturing facility .Our heating mantles made of alkali-free glass fiber insulation material, the Cr20Ni80 alloy wire spring installed in them, with aluminum silicate cotton by the vacuum shape of the hemispherical insulation body insulation. Each mantle is made with extreme care and is hand sewn to assure its reliability, quality and safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. All AIBOTE mantles go through the 'burn off' procedure at the end of the manufacturing process enabling use straight out of the box.