Fast delivery
Sea&Air
QG-2 Lithofacies Sample Cutting Machine
Cutting is the first important procedure in the process of the sample preparation. This machine is suitable for the general lithofacies materials. The shell, axle sleeve, jaw, work table and other main parts are all made of stainless steel, which can endure long time. It adopts quick clamp for manual feeding which is very convenient to operate. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for cutting lithofacies samples.
QG-3 cutting machine
This machine is suitable for general metallographic and lithofacies materials. By pulling the spindle and using the spindle gravity to cut the sample, the speed is high and the cutting ability is strong. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, while there is an opening in the left of the cover which can cut long strip samples, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting. This model is divided into benchtop and floor type for customers to choose.
QG-3A Metallographic Sample Cutting Machine
QG-3A Metallographic Sample Cutting Machine
The spindle shaft of the abrasive wheel is fitted on the rocker arm bearing block, it is driven by the V-belt. Loose or tight of the V-belt can be adjusted by deflecting the tensioner. Swinging motion of the swinging arm will convert to the feed motion of the abrasive wheel whether the cutting feed quick or slow will depend on the swinging arm. Above the working table is the specimen quick clamping device. Pressure bar can move up and down. Clamp and use easily and intelligently. There are cooling liquid passing in the pressure bar. Under the pressure bar there is the working clamp port.
QG-4 Metallographic Sample Cutting Machine
QG-4 Multifunctional Cutting Machine
QG-4 multifunctional cutting machine is mainly used for cutting cylinder and samples of anomalistic shape, such as multi-angular shape, protruding board, etc. It adopts the all-sealing structure, which can guarantee the cutting sample under the conditions of absolute safety. In order to avoid the sample burning the material texture because of over-heating in cutting, besides the cutter matching strong cooling system, the sample can revolve in the cutting, which can avoid the sample's surface being burned in the cutting, and can increase the cutting cross section, raising the availability of cutting emery wheel. The cutter has the advantages of easy to operate, use, maintain, etc, which is an excellent equipment of cutting anomalistic shapes.
QG-4A Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The cutting thickness of the material can be adjusted by the lateral movement of the cutting table, and then the sample can be cut by the longitudinal movement of the spindle, which has strong cutting ability and convenient operation. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-5 Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The sample can be cut by the longitudinal movement of the table, which has large cutting range and strong cutting ability. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel and with built-in flushing water gun, it has long service life and convenient maintenance. The cutting chamber adopts two sides’ transparent plexiglass window, built-in LED lamp and powerful exhaaust fan, which makes observation more clear. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-5A Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The sample can be cut by the longitudinal movement of the table, which has large cutting range and strong cutting ability. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel and with built-in flushing water gun, it has long service life and convenient maintenance. The cutting chamber adopts two sides’ transparent plexiglass window, built-in LED lamp and powerful exhaust fan, which makes observation more clear. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-90Z Metallographic Sample Cutting Machine
QG-90Z Metallographic Sample Cutting Machine
Brief Introduction:
QG-90Z metallographic sample cutting machine is a precision cutting machine integrating automatic mode and manual mode. With the optional X axis worktable, it has automatic and continuous cutting function along the Y axis. With the function of adjusting the height of chief axis, it is used in a variety of shapes, sizes and materials sample cutting. The cutting capacity can meet the daily production inspection and laboratory detection for cutting samples.
QG-PCB30 automatic precision cutting machine
QG-PCB30 automatic precision cutting machine adopts the speed regulation motor which drives the belt to control the cut-off wheel to achieve the effective speed. With the touch screen control, the display is clear and the function layout is reasonable. The feed of cutting can be controlled by cut-off wheel propulsion or by cutting table propulsion according to the different materials or personal habits, and also it can automatically finish cutting according to the set parameter. With built-in independent stainless steel circulating filter cooling water tank, combined with 80% water and 20% cutting fluid, it can effectively avoid the sample surface heat and prevent rail and ball screw rust. The machine has safety protection function for opening the cover. The working area is totally enclosed and has a transparent cover for observation during cutting. The cutting table can be equipped with different clamping tools which can be freely disassembled and cleaned. This benchtop cutting machine can be applied to the cutting of PCB plate, metal materials within Φ30mm, electronic parts and mounting samples, etc. The appearance is beautiful and the interface is easy to operate, which is the best choice of the small piece cutting.
QGZ-100120200300 Automatic Cutting Machine
This machine is a PLC controlled metallographic sample cutting machine, and it can also be controlled by electronic handwheel. The structure of the machine is firm and reasonable. The frequency conversion motor is directly connected with the cut-off wheel, which provides power transmission between the motor and the cut-off wheel and ensures the cutting efficiency. Also it adopts electromechanical separation structure to effectively protect electrical safety, which has convenient maintenance and long service life. Using Schneider electric and Mitsubishi software, X, Y, Z axis can be automatically and accurately controlled, it can adjust the amount of feed according to the hardness of material to achieve the fastest cutting effect. The cutting speed is controlled by frequency conversion, which has very high reliability and control ability.
QGZ-65 Automatic Metallographic Sample Cutting Machine
QGZ-65 Automatic Metallographic Sample Cutting Machine
This machine is a manual / automatic precision cutting machine. The whole machine adopts electromechanical separation structure, which is effective in protecting electrical safety and convenient in maintenance. The height of the spindle can be adjusted, Y axis can be automatically and accurately controlled, and the cutting table can automatically return after cutting. With automatic intelligent feeding, the speed can be automatically adjusted according to the hardness of the material to avoid blockage. This machine is suitable for the sample cutting of various shapes, sizes and materials, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QGZ-90 Automatic Metallographic Sample Cutting Machine
QGZ-90 Automatic Metallographic Sample Cutting Machine
This machine is a manual / automatic precision cutting machine. The whole machine adopts electromechanical separation structure, which is effective in protecting electrical safety and convenient in maintenance. The height of the spindle can be adjusted, Y axis and X axis can be both automatically and accurately controlled to achieve the continuous thin slice cutting of the sample. With automatic intelligent feeding, the speed can be automatically adjusted according to the hardness of the material to avoid blockage. This machine is suitable for the sample cutting of various shapes, sizes and materials, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QGZ-DG1 automatic guide rail cutting machine
This machine is specially designed for cutting guide rail type workpieces. It adopts ABB high-power motor, Schneider Electric and Mitsubishi software to realize efficient and fast cutting of workpieces. It has very high reliability and control ability. After the workpiece is cut off, the spindle automatically returns to its position, and the uninterrupted cutting operation can be realized by cooperating with the roller conveyor. The surface of the cut sample is bright, flat and free of burn. It is an ideal equipment for cutting guide rail type workpiece, and is suitable for production, processing and sample preparation inspection.
QIEGE-100S Manual / Automatic Metallographic specimen cutting machine
QIEGE-100S Manual / Automatic Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of superheat. This machine has stainless machine body and worktable, and it features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
QIEGE-60S Metallographic specimen cutting machine
QIEGE-60S Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of superheat. This machine has stainless machine body and worktable, and it features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
SQ-100A Metallographic specimen cutting machine
SQ-100A Metallographic specimen cutting machine is equipped with stainless cover and it can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of superheat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
SQ-60 Metallographic specimen cutting machine
SQ-60 Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid burning the metallographic or lithofacies structure of specimen because of superheat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
SQ-80 Metallographic Sample Cutting Machine
SQ-80 Metallographic Sample Cutting Machine
Product Description
The machine is suitable for cutting various metal, non-metallic materials, in order to observe the material metallographic core organization. The machine has cooling device so also to take away the heat produced during the cutting. It is easy to use for users. It is an ideal equipment for factories, scientific research institution and colleges and universities laboratory.
SQG-1 cutting machine
Cutting is the first important procedure in the process of the sample preparation. This machine adopts high speed rotating resin cut-off wheel to cut the samples. In order not to burn the sample, it is equipped with cooling system. It is widely used in the metallographic laboratory for cutting various samples, which is very easy to operate and maintain.
ZDQ-500 automatic metallographic cutting machine
ZDQ-500
This machine is a metallographic sample cutting machine automatically controlled by PLC. The control system and servo motor are made of Mitsubishi brand. The X, y and Z directions are automatically and precisely controlled. The intelligent cutting can change the feed amount according to the material hardness to achieve rapid cutting effect. The cutting speed is controlled by frequency conversion, which has very high reliability and control ability.
ZQ-100A MANUAL/AUTOMATIC
ZQ-100A MANUAL/AUTOMATIC
METALLOGRAPHIC SPECIMEN CUTTING MACHINE
This machine consists of machine body, electrical control box, cutting chamber, motor, cooling system and cutting wheel, etc. It is equipped with quick clamper and the cooling system can cool down the sample during cutting process so as to avoid damage to the metallographic structure of specimen because of overheat. It is available to choose three different kinds of cutting modes according to different samples, it can also preset cutting speed and cutting travel, which improves the sample cutting quality a lot. This machine can be operated in manual or automatic cutting modes and equipped with safety protection function. The prompt of running state is convenient for human-machine conversation, large volume cutting chamber is easy for user to operate. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
