Fast delivery
Sea&Air
MIC-DM tool microscope
MIC TECH’S MIC-DM is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axis or three axis, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
Manual stage with high-resolution linear encoder makes fast and accurate measurement
zoom ratio 7:1 high quality lens
high resolution camera
share and clear image
transmitting, oblique illumination, and coaxial illumination
MIC-HL tool microscope
More accurate step measurement no Segment difference
sharp and excellent surface checking
Good illumination which can be applied to different working environment
Deep and large field of view
Color CCD camera
Digital image storage
MIC-JB precision measuring microscope
MIC-JB precision measuring microscope is a small size Two-dimensional measuring instrument with digital display,it is compact structure,imaging clearly and high precision.It adopts reflected and transmitted illumination,observe,analyze and measure the geometric sense of precision work piece through observation and digital display system.The microscope is wildly used in measuring room,produce line and department of research institutions,etc.Two-dimensional measuring software is available for your selection,for some geometric parameters which is difficult to measure directly,such as circle,arc,coaxial,parallel,crossing,relation of shape & position and virtual dimension,etc,it can get the result and output report automatically and quickly.
MIC-JD18 projecting universal length measuring machine
MIC-JD18 projecting universal length measuring machine
Characteristics:
- The wax-screen technique is adopted for the projection screen, clear in imaging and homogeneous in brightness of the field
- High quality cast iron through long-term aging treatment is adopted for the base frame, strong in rigidity and good in stability.
- The double and single wire reading system is adopted, precise in pointing and accurate in measurement
- The worktable can move, rotate and out-beat in every direction, convenient for the detection of parts in different forms
- This instrument equipped with multiple accessories of tailstock, measuring hooks and caps, etc, large range in measurement.
MIC-JD20 precision optimeter
MIC-JD20 0.2μm precision optimeter
Characteristics:
- New screen technology, attaching reading magnifier with uniform field brightness and clear image
- Hight measuring accuracy, stable and reliable data, convenient and fast measurement for precision parts with small dimension.
- Well structure design, small overall dimension, convenient for transportation
MIC-JD22A digital vertical length measuring machine
MIC-JD22A digital vertical length measuring machine
Characteristics:
- Advanced raster sensor is adopted and measuring data are displayed digitally
- Main measuring shaft is square in design, with satisfactory running linearity and stable performance
- The design accord with Abbe’s theorem, with higher measuring precision and without Abbe error
- Main shaft running can be measured automatically or manually, convenient for the measurement of batch workpieces with higher working efficiency
MIC-JD25C-25D data processing universal length measurer
MIC-JD25C-25D data processing universal length measurer
SPECIFICATION
Main Measure Work-pieces Include:
Smooth columniform worpieces (Axis, hole, plug gauge and ring gauge etc )
The mid-diameter of internal thread, external thread, thread plug gauge and thread ring gauge
Workpieces with parallel plane (calipers, length bar and low-grade measuring block)
MIC-JD2A horizontal projection optimeter
MIC-JD2A length measuring machine---horizontal projection optimeter
The length measuring machine is a kind of instruments used for measuring the distance between two end faces of a measured piece: its end faces include plane or curved ones and exterior or internal ones. The length measuring machine are divided into optical ones, linear measuring instruments and linear measuring machines
The length measuring machine is widely used in the measuring rooms of the enterprises in the engineering industry, tooling, measuring implement manufacturing industry and instrument and metering industry, etc. And also used in the professional measurement and appraisal department at various levels.
MIC-JD3 vertical projection optimeter
MIC-JD3 vertical projection optimeter
Characteristics:
- New screen technology, attaching reading magnifier with uniform field brightness and clear image
- Hight measuring accuracy, stable and reliable data, convenient and fast measurement for precision parts with small dimension.
- Well structure design, small overall dimension, convenient for transportation
- Dual purpose instrument, i.e. the projection optimeter glass tube can be taken off and installed on a machine tool to directly control finish size
MIC-JX11B Digital Multipurpose toolmaker’s microscope
MIC-JX11B Digital Multipurpose toolmaker’s microscope
Characteristics:
- The master microscope is equipped with multiple eyepieces and objectives, with large field view and sharp image.
- The photoelectric and digital technology is adopted, taking the precision grating scale as sensory element, with high accuracy of measurement.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
- The transmission and indirect lighting can measure profile and the surface sizes
- High-speed movement and vernier arrangement are installed and can be switched over speedily.
- Multiple accessories of tailstock, V-type support, height-measuring device and etc, with wide use range.
MIC-JX13B computer multipurpose toolmaker’s microscope
MIC-JX13B computer multipurpose toolmaker’s microscope
Characteristics:
- The master microscope is equipped with multiple eyepieces and objectives, with large field view and sharp image.
- The photoelectric and digital technology is adopted, taking the precision grating scale as sensory element, with high accuracy of measurement.
- Advanced computer processing technology is adopted to input collected real-time signals in the grating and video data system into the computer, which were processed by the powerful 2-coordinate measuring software, this instrument can effectively fulfill all kinds of complicated measuring work.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
- The transmission and indirect lighting can measure profile and the surface sizes
- High-speed movement and vernier arrangement are installed and can be switched over speedily.
- Multiple accessories of tailstock, V-type support, height-measuring device and etc, with wide use range.
MIC-JX13C universal computer multipurpose toolmaker’s microscope for image processing
MIC-JX13C universal computer multipurpose toolmaker’s microscope for image processing
Characteristics:
- The imported precision grating system is adopted as the sensory element; with numerous strong points of low heating power, corrosion resistance, pollution resistance, good vibration strength etc.
- The microscope, with powerful image processing software, can complete complicated measuring work, with its software data communicating with CAD to complete the surveying and mapping work.
- The semi-conducting laser as a sensor finder is used for speedily defining the measuring location, thus upgrading the efficiency of image locating.
- The software of digital imaging technology is adopted to automatically identify the outline boundary and to reduce human caused errors, thus upgrading the operational efficiency.
- With a digital display rotary table and a height-measuring device; all measured results of angles and heights can be digitally displayed, direct and convenient.
- The LED cold light source is adopted for the whole lighting device, with low heating power and long life.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
MIC-JX14B digital large scale toolmaker’s microscope
MIC-JX14B digital large scale toolmaker’s microscope
Characteristics:
- The photoelectrical technique is adopted, with a precision grating rule as a measurer for X- and Y- axis as a measurer, with readings direct-viewing and testing convenient.
- With multiple eyepieces and objectives, the main microscope has a large scope of view field with clear image formation
- The main microscope can oscillate left and right, suitable for the measurement for spiral pats.
- LED-luminotron lighting is adopted for transmission and indirect lighting, with low heating power and long life.
- High speed and micro-motion devices are adopted which can be switched over quickly.
- The tailstock rack is installed to measure the axel-type parts
- Multiple accessories are provided, with extensive uses.
MIC-JX14B1 digital large scale toolmaker’s microscope
MIC-JX14B1 digital large scale toolmaker’s microscope
Characteristics:
- The photoelectrical technique is adopted, with a precision grating rule as a measurer for X- and Y- axis as a measurer, with readings direct-viewing and testing convenient.
- The integral digital display box is installed in front of the base frame, consisting of a unified entity with the mainframe; with a simple system easy to operate
- With multiple eyepieces and objectives, the main microscope has a large scope of view field with clear image formation
- The main microscope can oscillate left and right, suitable for the measurement for spiral pats.
- LED-luminotron lighting is adopted for transmission and indirect lighting, with low heating power and long life.
- High speed and micro-motion devices are adopted which can be switched over quickly.
- The tailstock rack is installed to measure the axel-type parts
- Multiple accessories are provided, with extensive uses.
MIC-JX6 toolmaker’s microscope
MIC-JX6 toolmaker’s microscope
This toolmaker’s microscope manufactured by Chongqing MIC Technology Co.,Ltd are divided into large scale and universal toomaker. According to the characteristics of products performance. Toolmaker microscope are divided into various types: those with graduation readout type, or with digital display type, with software processing, with CCD and image software processing and etc. They have high measuring accuracy and can satisfy the requirement of different clients.
Toolmaker’s microscope can accurately measure size, angles, forms and positions of various work pieces and varied parameters of the screw-thread manufactured pieces. It is widely used in the measurement and checking services in the sectors of machinery, instrumentation, die equipment manufacturing, instrument and metering, military industry, aviation and aerospace industry and automobile manufacturing, electronics, plastics and rubber etc, or in colleges and universities, research institutes. This instrument with multiple accessories of optical locator, tailstock rack, double-image eyepieces, template eyepieces, etc. Can be used for the quality detection and control for machinery parts, measuring tool, pattern die, electronic elements, circuit board, presswork, plastic and rubber products etc.
MIC-JX7 Multipurpose toolmaker’s microscope
MIC-JX7 Multipurpose toolmaker’s microscope
Characteristics:
- The master microscope is equipped with multiple eyepieces and objectives, with large field view and sharp image.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
- The transmission and indirect lighting can measure profile and the surface sizes
- High-speed movement and vernier arrangement are installed and can be switched over speedily.
- Multiple accessories of tailstock, V-type support, height-measuring device and etc, with wide use range.
MIC-MX12 automatic wafer inspection microscope
MIC TECH’s newly launched MIC-MX12 model five axis full-automatic wafer inspecition microscope is specially designed for large scale electronic component, wafer, epistar, semi-conductor quality checking. With full function such as bright field, dark field, DIC, simple polorizing and other methods, gurantee your high resolution image with sharp contrast. The following is FULL AUTO MIC TECH AWL wafer system based on MIC-MX12 model
MIC-SQ600 Measuring Microscope
MIC-SQ600 Measuring Microscope Specification
MIC-SQM-FA Measuring Microscope
MIC-SQ600 Measuring Microscope Specification
MIC-TB Portable metallurgical microscope
MIC-TB Portable metallurgical microscope
100X-400X
Triple Plan 10X、20X、40X
MIC-TX Portable metallurgical microscope
MIC-TX Portable metallurgical microscope
100X-400X
Triple Plan 10X、20X、40X
MIC-TZ1A Eccentricity testing microscope
MIC-TZ1A Eccentricity testing microscope
Internal focusing transmission type centering error inspection system
This microscope is designed for centering of test lenses.
Capable to read with high accuracy for centering of doublet lenses and direction of gap in decentering.
This model is developed having a wider measuring range and easier adjustment in the collimator lens.
Internal focusing transmission type centering error inspection system
This microscope is designed for centering of test lenses.
Use: Can be used to check all kinds of lens which focus is from 5-500mm, good instrument for optical lens making, used for assembly calibrating, test for coaxial deviation between the sphere lens optical axis with the out sphere, especially good for short focus distance hign level lens.
MIC-VM tool microscope
VM serials tool microscope is one smart microscope can be applied in the semi-conductor manufacturing and CCD monitoring.
Long working distance objective, nice calibration for large range of wavelength radiation.
Fiber cable cold light can avoid heating to the samples.
Three kinds of YAG laser light wavelength 1064nm, 532nm, 355nm, can use thin film laser cutting technology in semi-conductor and liquid crystal substrate
Manual or auto is applicable according to customer’s applications.
MIC-WM10 digital microscope system
MIC-WM10 digital microscopy system
Compared with the traditional optical microscope, MIC-WM10 digital microscopy system using high performance optical device and a CCD camera, can be observed on the display screen vivid color images; because the use of digital technology, you can easily make use of the computer and network platform digitizing sample observation, measurement, and processing, etc.
